Evaluation of the dimensional stability of three irreversible hydrocolloid trademarks

Authors

DOI:

https://doi.org/10.11606/issn.2357-8041.clrd.2021.181651

Keywords:

Alginates, Dental materials, Dental prosthesis

Abstract

Objective: This in vitro study aimed to evaluate the influence of seven pouring times on dimensional stability of three brands of irreversible hydrocolloids: Jeltrate Plus (Dentsply Sirona, São Paulo, Brazil), Hydrogum 5 (Zhermack, Badia Polesine, Italy) and CavexColor Change (Cavex, Haarlem, The Netherlands). Material and methods: A standard acrylic model with a flat base and four straight pillars was made: A, B, C and D. In total, 105 impressions were made, 35 from each commercial brand, subdivided into seven groups according to the pouring times: immediately after alginate impression; 30 minutes; 2 hours; 24 hours; 48 hours; 120 hours and 216 hours after alginate impression. Then, the measurements of the distance between the points (measures AB, BC and CD) were performed. A two-way analysis of variance (ANOVA) and Tukey’s post-hoc test (α = 0.05) were used as statistical tests. Results: Dimensional stability was directly affected by the storage time and the alginate brand (p < 0.05). Jeltrate Plus showed increasing dimensional changes after 2 hours of storage. Hydrogum 5 and Cavex Color Change were stable for 120 and 48 hours, respectively. Conclusion: In suitable storage conditions, Hydrogum 5 and Cavex Color Change brands showed greater dimensional stability.

Downloads

Download data is not yet available.

Author Biographies

  • Antônio Lopes Júnior, Rede de Ensino Doctum

    Rede de Ensino Doctum, Serra, Es, Brasil

  • Caio Felipe de Almeida Nobre, Universidade Estadual de Campinas

    Departamento de Odontologia Restauradora, Faculdade de Odontologia de Piracicaba da Universidade Estadual de Campinas, Piracicaba, SP, Brasil

  • Gabriel Ramos Rúbio, Rede de Ensino Doctum

    Rede de Ensino Doctum, Serra, Es, Brasil

  • Mariana Itaborai Moreira Freitas, Universidade Estadual de Campinas

    Departamento de Clínica Odontológica, Faculdade de Odontologia de Piracicaba da Universidade Estadual de Campinas, Piracicaba, SP, Brasil

  • May Anny Alves Fraga, Universidade Estadual de Campinas

    Departamento de Odontologia Restauradora, Faculdade de Odontologia de Piracicaba da Universidade Estadual de Campinas, Piracicaba, SP, Brasil

  • Nathalia Silveira Finck, Rede de Ensino Doctum

    Rede de Ensino Doctum, Serra, Es, Brasil

References

Sakaguchi, RL, Ferracane J, Powers, JM. Craig’s restorative dental materials-e-book. 14th ed. Amsterdam: Elsevier Health Sciences; 2012.

Werneck RD, Marba L, Finck NS, Garcia IM, Delai P. Avaliação da estabilidade dimensional de três marcas de hidrocoloides irreversíveis. Full Dent Sci. 2014;5(17):157-62.

Kulkarni MM, Thombare RU. Dimensional changes of alginate dental impression materials-An invitro study. J Clin Diagn Res. 2015;9(8):98-102. doi: https://doi.org/10.7860/JCDR/2015/13627.6407.

Aalaei S, Ganj-Khanloo R, Gholami F. Effect of storage period on dimensional stability of alginplus and hydrogum 5. J Dent (Tehran). 2017;14(1):31-9.

Kusugal P, Chourasiya RS, Ruttonji Z, Astagi P, Nayak AK, Patil A. Surface detail reproduction and dimensional stability of contemporary irreversible hydrocolloid alternatives after immediate and delayed pouring. Contemp Clin Dent. 2018;9(1):20-5. doi: https://doi.org/10.4103/ccd.ccd_676_17.

Firla ML. The potential of alginate. In: Cavex Alginate. Producten [Internet]. Haarlem: Cavex; 2015 [citado em 15 dez 2020]. [3 p.]. Disponível em: https://x6p2q9g2.rocketcdn.me/wp-content/uploads/2020/11/Publication-The-potentional-of-Alginate-EN-201508.pdf

Cervino G, Fiorillo L, Herford AS, Laino L, Troiano G, Amoroso G, et al. Alginate materials and dental impression technique: A current state of the art and application to dental practice. Mar Drugs. 2019;17(1):18. doi: https://doi.org/10.3390/md17010018.

Guiraldo RD, Moreti AFF, Martinelli J, Berger SB, Meneghel LL, Caixeta RV, Sinhoreti MAC. Influence of alginate impression materials and storage time on surface detail reproduction and dimensional accuracy of stone models. Acta Odontol Latinoam. 2015;28(2):156-61. doi: https://doi.org/10.1590/S1852-48342015000200010.

Sahin V, Jodati H, Evis Z. Effect of storage time on mechanical properties of extended-pour irreversible hydrocolloid impression materials. J Prosthet Dent. 2020;124(1):69-74. doi: https://doi.org/10.1016/j.prosdent.2019.09.001.

Fonte-Boa JC, Lanza MDS, Peixoto RTRC, Drummond AF, Sousa EL. Dimensional analysis of alginate molds after storage. Arq Odontol. 2016;52(2):117-22.

Camargo HA, Ribeiro JF. Correlação entre comprimento da coroa e comprimento total do dente em incisivos, caninos e pré-molares, superiores e inferiores. Rev Odontol UNESP. 1991;20:218-25.

Costa RV, Valente MGS, Rocha SS. Analysis of the dimensional stability of extended-storage irreversible hydrocolloids. Robrac. 2017;26(76):7-10.

Dentsply Sirona Brasil. Jeltrate Plus: Material de Moldagem Odontológico [Internet]. Pirassununga: Dentsply Sirona; [2018] [citado em 15 dez 2020]. Disponível em: http://www.dentsply.com.br/bulas/diretory/J/Jeltrate-Plus.pdf

Zhermack Product. Hydrogum 5 [Internet]. Badia Polesine: Zhermack; [2018] [citado em 15 dez 2020]. Disponível em: https://www.zhermack.com/en/product/hydrogum-5/.

Sansiviero A, Bauer JRO, Masuda MS, Sigemori RM, Oliveira MT, Tavares CARF Jr, Silva MPB. Expansão de presa de gesso tipo IV (pedra) de alta resistência em diferentes técnicas de manipulação e marcas diversas. ConScientiae Saúde. 2008;7(3):373-8.

Powers JM, Craig RG. Materiais dentários restauradores. 11th ed. São Paulo: Santos; 2004.

Rodrigues SB, Augusto CR, Leitune VCB, Samuel SMW, Collares FM. Influence of delayed pouring on irreversible hydrocolloid properties. Braz Oral Res. 2012;26(5):404-9. doi: https://doi.org/10.1590/s1806-83242012000500005.

Wandrekar S, Juszczyk AS, Clark RKF, Radford DR. Dimensional stability of newer alginate impression materials over seven days. Eur J Prosthodont Restor Dent. 2010;18(4):163-70.

Fellows CM, Thomas GA. Determination of bound and unbound water in dental alginate irreversible hydrocolloid by nuclear magnetic resonance spectroscopy. Dent Mater. 2009;25(4):486-93. doi: https://doi.org/10.1016/j.dental.2008.10.001.

Calmon JDQ, Relvas A, Lefrançois M, Azevedo MV, Sotelo P, Sotelo L. Estabilidade dimensional de moldes obtidos com alginato de armazenamento tardio. Rev Odontol UNESP. 2019;48:e20190098. doi: https://doi.org/10.1590/1807-2577.09819.

Published

2021-08-18

Issue

Section

Original Research

How to Cite

Lopes Júnior, A., Nobre, C. . F. de A. ., Rúbio, G. R. ., Freitas, M. I. M. ., Fraga, M. A. A. ., & Finck, N. S. . (2021). Evaluation of the dimensional stability of three irreversible hydrocolloid trademarks. Clinical and Laboratorial Research in Dentistry. https://doi.org/10.11606/issn.2357-8041.clrd.2021.181651