BIM maturity assessment instrument automation

Authors

DOI:

https://doi.org/10.11606/gtp.v18i1.194643

Keywords:

Component model, BIM macro maturity, Noteworthy BIM publications (NBP), Macro BIM assessment

Abstract

Building Information Modeling (BIM) is considered as a disruptive innovation for Civil Construction Industry. Measuring a country’s BIM maturity requires macro-scale analysis and a specific approach. This paper is part of an ongoing PhD research that aims to deepen the issues related to the assessment of BIM maturity in countries. Based on the “Component Model,” created in 2015 by researchers Bilal Succar and Mohamad Kassem, the methodology used was Design Science Research (DSR) and proposes the construction of an artifact referred to the Notable BIM Publications (NBPs) component as a source of evidence for macro maturity analysis. For a macro market maturity response, it was essential to establish flows so that the NBPs collected could be recorded, enabling qualifying, quantifying and validate as evidence. In this sense, a logic involving concepts related to the Content Taxonomy and the Relevance Index has been created - essential to check four requirements: Existence, Coverage and Content Overlay, Relevance and Optimization of NBPs. The partial results revealed a system that can be applied by automating the use of the “Component Model”.

Downloads

Download data is not yet available.

Author Biographies

  • Mônica Santos Salgado, Universidade Federal do Rio de Janeiro

    Monica Santos Salgado is a Senior Collaborator and member of the Permanent Body of the Graduate Program in Architecture at the Federal University of Rio de Janeiro (UFRJ/PROARQ). Full Professor at FAU UFRJ acting as an active member of the university from July 1993 to October 2021. Scientist of Our State FAPERJ (since 2021). Visiting Professor at Parsons School of Design, USA (CAPES PRINT - 2020). Researcher at CNPq (since 2011). She was a professor at the Polytechnic School of UFRJ from 1993 to 2005 and at the Faculty of Architecture and Urbanism from 2005 to 2021. She held a postdoctoral degree at the École Nationale Superieure d'Architecture de Toulouse-France (ENSAT-2010); PhD in Production Engineering from COPPE - UFRJ (1993/1996). Master's in Architecture from PROARQ FAU UFRJ (1990/1992), Post-Graduation in Occupational Safety Engineering (POLIUFRJ 2000-2002), Post-Graduation in Environmental Management (POLIUFRJ 2004-2005) and is an Architect graduated from FAU UFRJ (1981 /1986). She was Coordinator of the Graduate Program in Architecture at the Federal University of Rio de Janeiro (PROARQ UFRJ), from 2016 to 2019, when the program received grade 6 in the CAPES assessment, and coordinator of the Undergraduate Course in Civil Engineering at the same University from 2000 to 2001. Since 1996, he has been the leader of GEPARQ - Research Group on Project Management in Architecture: technology, sustainability and BIM. She develops research related to the management of the design process of buildings and cities, exploring the possibilities offered by digital technologies with an emphasis on BIM (Building Information Modeling). She also participates in the Editorial Board of the magazine Gestão e Tecnologia de Projetos. She supervised more than 100 final course works at different training levels (undergraduate, master's and doctorate) with publications in journals and annals of national and international events. She is an evaluator of international journals such as Architectural Engineering and Design Management, World Journal of Entrepreneurship, Management and Sustainable Development, Journal of Cultural Heritage Management and Sustainable Development, and national journals such as Gestão & Tecnologia de Projetos, Oculum Ensaios, Cadernos do PROARQ; also acting in the evaluation of projects submitted to funding agencies - CAPES, CNPq, FAPES, FAPESP and FAPEMIG.

  • Eduardo Toledo Santos, Universidade de São Paulo

    Eduardo Toledo Santos is an Electrical Engineer (Electronics), Master in Electrical Engineering (Digital Systems) and PhD in Electrical Engineering (Electronic Systems) from the Polytechnic School of the University of São Paulo. He is currently Professor Doctor 2 at the Polytechnic School of the University of São Paulo, Coordinator of the Professional Master's Program in Innovation in Civil Construction at the Polytechnic School of USP (ConstruInova), Rapporteur of the GT Objects BIM of the Special Commission for Studies on BIM (CEE-134 ) from ABNT, Director of BIM Forum Brasil, Director of Publicity at ANTAC, ad hoc consultant to FAPESP and CNPq, member of the ASCE Global Center of Excellence in Computing, alternate member of the board of directors of the International Society for Computing in Civil and Building Engineering, member of the BIM Technical Committee of the ISCCBE, member of the Working Commission W78 (IT in Construction) of the CIB - Intl. Council for Research and Innovation in Building and Construction and director for the Americas at ISGG - International Society for Geometry and Graphics. He has published over 200 papers in scientific journals and conference proceedings. It has 7 book chapters and 10 published/organized books. It has 15 software (five registered) and another 35 technical production items. He organized 12 events and participated in more than one hundred in Brazil and abroad. He supervised 18 master's dissertations and 4 doctoral theses, in addition to having supervised 22 scientific initiation works in the areas of Civil Engineering, Education, Mechanical Engineering and Computer Science. He has received 12 awards and/or honors. He participated in 16 research projects. He works in the area of ​​Civil Engineering, with an emphasis on Information Technology, working mainly on the following topics: Building Information Modeling (BIM), Virtual Reality, Information Technology, Distance Education, Civil Construction, Geometry, Technical Drawing, Internet, Computer Graphics , Descriptive Geometry and Engineering Teaching.

References

AZZOUZ, A., SHEPHERD, P.; COPPING, A. The Emergence of Building Information Modelling (BIM-AMs). Department of Architecture and Civil Engineering University of Bath, Bath, 2016. Disponível em https://researchportal.bath.ac.uk/en/publications/emergence-of-building-information-modelling-assessment-methods, Acesso em: dez. de 2021.

AGÊNCIA BRASILEIRA DE DESENVOLVIMENTO INDUSTRIAL (Brasília, DF). Processo de projeto BIM: Coletânea Guias BIM ABDI-MDIC. 1. ed. Brasília, DF: ABDI-MDIC, 2017. Disponível em: https://mutual.com.br/wp-content/uploads/2018/01/GUIA-BIM01_20171101_web.pdf. Acesso em: dez. de 2021.

BÖES, Jefferson S., Proposta de Plano de Implementação do BIM na Indústria da Construção Civil. 2019. Dissertação (Mestrado em Engenharia Civil) – Universidade Federal do Ceará, Ceará, 2019.

BRASIL. Decreto no 9.377, de 17 de maio de 2018. Disponível em: https://www2.camara.leg.br/legin/fed/decret/2018/decreto-9377-17-maio-2018-786731-publicacaooriginal-155623-pe.html. Acesso em: dez. 2021.

BRASIL. Decreto no 10.306, de 2 de abril de 2020. Disponível em: https://www2.camara.leg.br/legin/fed/decret/2020/decreto-10306-2-abril-2020-789938-norma-pe.html. Acesso em: dez. 2021.

BRÍGITTE, G. T. N.; RUSCHEL, R. C. Operacionalização de parâmetros de projeto por meio do enriquecimento semântico em modelos BIM de habitação de interesse social. Gestão & Tecnologia de Projetos, [S. l.], v. 15, n. 2, p. 20-32, 2020. DOI: 10.11606/gtp.v15i2.159857. Disponível em: https://www.revistas.usp.br/gestaodeprojetos/article/view/159857. Acesso em: 14 nov. 2021.

CÂMARA BRASILEIRA DA INDÚSTRIA DA CONSTRUÇÃO. Coletânea Implementação do BIM para Construtoras e Incorporadoras. Brasília, DF: CBIC, 2016. Disponível em: https://www2.camara.leg.br/legin/fed/decret/2020/decreto-10306-2-abril-2020-789938-norma-pe.html. Acesso em: jan. 2022.

CHECCUCCI, É. S.; PEREIRA, A. P. C.; AMORIM, A. L. Uma visão da difusão e apropriação do paradigma BIM no BRASIL. Gestão e Tecnologia de Projetos, São Paulo, v. 8, n. 1, p. 19-39, jan.-jun. 2013. http://dx.doi. org/10.4237/gtp.v8i1.232

DRESCH, A.; LACERDA, D. P.; ANTUNES JÚNIOR, J. A. V.; Design science research: método de pesquisa para avanço da ciência e tecnologia. Porto Alegre: Bookman, 2015. 204p.

HORE, A., McAULEY, B., WEST, R.P., KASSEM, M., KUANG, S. Ireland’s BIM Macro Adoption Study: Establishing Ireland’s BIM Maturity. In: CITA BIM Gathering 2017, November 23rd – 24th p. 32. 40

GONÇALVES, Gustavo Carezzato. Protocolo de gerenciamento BIM nas fases de contratação, projeto e obra em empreendimentos civis baseado na ISO 19650. 140 p. 2018. Dissertação (Mestrado) - Escola Politécnica da Universidade de São Paulo. Departamento de Engenharia de Construção Civil. São Paulo, 2018.

KASSEM, M., SUCCAR, B., DAWOOD, N., A proposed approach to comparing the BIM maturity of countries, Paper presented at the 30th International Conference on Applications of IT in the AEC Industry — CIB W078, Beijing, China, 2013.

KASSEM, M., SUCCAR, B., DAWOOD, N., Building information modeling: analyzing noteworthy publications of eight countries using a knowledge content taxonomy, in: R. Issa, S. Olbina (Eds.), Building Information Modeling: Applications and Practices in the AEC Industry, University of Florida: ASCE Press, 2014.

KASSEM, Mohamad; AMORIM, Sergio R. L. BIM Building Information Modeling no Brasil e na União Europeia. Apoio aos Diálogos Setoriais EU-Brasil, Fase III. Brasília, 2015.

KASSEM, M.; SUCCAR, B. Macro BIM adoption: Comparative market analysis. Automation in Construction, n.81. pages 286-299, 2017. DOI doi 10.1016/j.autcon.2017.04.005. Disponível em: <https://goo.gl/LcYTns>. Acesso em: 20 abr. 2019.

LACERDA, D. P.; DRESH, A.; PROENÇA, A.; JUNIOR, J.A.V.A. Design Science Research: método de pesquisa para a engenharia de produção. Gest. Prod., São Carlos, v. 20, n. 4, p. 741-761, 2013. DOI:10.1590/S0104-530X2013005000014. Disponível em: https://www.scielo.br/j/gp/a/3CZmL4JJxLmxCv6b3pnQ8pq/?format=html&stop=previous. Acesso em 11 dez. 2021

LIMA, Luciana O. Análise de modelos de maturidade para medição da implementação do building information modeling (BIM). 2019, 171 f. Dissertação (Mestrado em Engenharia Civil) – Universidade Tecnológica Federal do Paraná, Curitiba, 2019.

LIMA, L. de O.; CATAI, R. E.; SCHEER, S. Análise de modelos de maturidade para medição da implementação do Building Information Modeling (BIM). Gestão & Tecnologia de Projetos, [S. l.], v. 16, n. 2, p. 133-147, 2021. DOI: 10.11606/gtp.v16i2.167253. Disponível em: https://www.revistas.usp.br/gestaodeprojetos/article/view/167253. Acesso em: 14 nov. 2021.

MACHADO, Fernanda A.; RUSCHEL, Regina C.; SCHEER, Sergio. Análise da produção científica brasileira sobre a Modelagem da Informação da Construção. Ambiente Construído, Porto Alegre, v. 17, n. 4, p. 359-384, out./dez. 2017.

MACHADO, F. A.; DELATORRE, J.P.M.; RUSCHEL, R. C.; BIM in Latin American Countries: An Analysis of Regulation Evolution. In: E. Toledo Santos and S. Scheer (Eds.): ICCCBE 2020, LNCE 98, pp. 425–451, 2021.https://doi.org/10.1007/978-3-030-51295-8_30

NARDELLI, Eduardo Sampaio. BIM and Public Bidding in Brazil. In: CONGRESSO INTERNACIONAL DA SOCIEDADE IBEROAMERICANA DE GRÁFICA DIGITAL, 22., 2018, São Carlos. Proceedings [...]. São Paulo: Bluncher, 2018. ISSN 2318-6968. DOI 10.5151/sigradi2018-1351. Acesso em: 1 dez. 2018

NIBS (National Institute of Building Sciences). International BIM Report 2020. Disponível em: https://www.thenbs.com/knowledge/national-bim-report-2020. Acesso em: 11 dez. 2021.

SEBASTIAN, Rizal; VAN BERLO, Léon. Tool for Benchmarking BIM Performance of Design, Engineering and Construction Firms in The Netherlands. Architectural Engineering and Design Management, 6:4, 254-263, 2010. https://doi.org/10.3763/aedm.2010.IDDS3. Acesso em: 20 dez. 2021

SUCCAR, Bilal. Building Information Modelling Maturity Matrix. Handbook of Research on Building Information Modeling and Construction Informatics: Concepts and Technologies. IGI, p.65-103, 2010.

SUCCAR, Bilal; SHER, Willy; WILLIAMS, Anthony. Measuring BIM Performance: Five Metrics. Architectural Engineering and Design Management, v. 8, n. 2, p. 120-142, 2012.

SUCCAR, B.; KASSEM, M. Macro-BIM adoption: Conceptual structures. Automation in Construction, [S.I.], v. 57, p.64–79, 2015. DOI: https://doi.org/10.1016/j.autcon.2015.04.018. Acesso em: 5 out. 2018

SUCCAR, Bilal; KASSEM, Mohamad. Building Information Modelling: Point of Adoption. CIB World Congress, Tampere Finland, 30 mai. / 3 jun., 2016.

Downloads

Published

2023-08-27

Issue

Vol. 18 No. 1 (2023)

Section

Papers

License

Copyright (c) 2023 Cristiane Ramos Magalhães, Mônica Santos Salgado, Eduardo Toledo Santos

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Copyright Notice

Authors who publish in this journal agree to the following terms:

  1. Authors retain the copyright and grant the journal the right of first publication, with the article simultaneously licensed under the Creative Commons Attribution License BY NC ND, which allows the sharing of article with acknowledgment of authorship and initial publication in this journal.

 

  1. Authors are authorized to take additional contracts separately, for non-exclusive distribution of version of the article published in this journal (e.g. publish in institutional repository or as a book chapter), with acknowledgment of authorship and initial publication in this journal.

 

  1. Authors are allowed and encouraged to publish and distribute their research work online (e.g. in institutional repositories or on their personal page) at any point before or during the editorial process, as this can generate productive changes, as well as increase the impact and the citation of published article (See O Efeito do Acesso Livre).

How to Cite

MAGALHÃES, Cristiane Ramos; SALGADO, Mônica Santos; SANTOS, Eduardo Toledo. BIM maturity assessment instrument automation. Gestão & Tecnologia de Projetos (Design Management and Technology), São Carlos, v. 18, n. 1, p. 27–39, 2023. DOI: 10.11606/gtp.v18i1.194643. Disponível em: https://revistas.usp.br/gestaodeprojetos/article/view/194643.. Acesso em: 26 jun. 2024.